Effect of pressure on the low-temperature reaction of ethylene with N2O4

Calorimetric monitoring of the autoclave reaction N₂O₄ + C₂H₄ at –85 to +10 °C under argon pressure 10–30 bar revealed that the exothermic chemical reaction started at temperatures above –52 °C at 10 bar, whereas an intensive exothermic reaction started at –85 °C and pressure of 30 bar. IR study showed that oligo/polynitroethylene was formed at 30 bar, while carbonyl and hydroxy compound as well as nitrate R–ONO₂ formation occurred upon processing at 10 bar.     

Electro-Optical and Thermophysical Characterization of Poly (Tripropylene Glycol Di-Acrylate)/Liquid Crystal Composite Materials Prepared by Polymerization Induced Phase Separation

Abstract

This work examines the development and characterization of tripropylene glycol di-acrylate/liquid crystal E7 (TPGDA/LC E7) PDLCs composite materials (polymer-dispersed-liquid-crystals). These systems were produced by UV irradiation photopolymerization (PIPS) of a mixture of the monomer tripropylene glycol di-acrylate (TPGDA) and the liquid crystal E7 (LC E7, a mixture of three cyano-biphenyl and one cyano-terphenyl LCs), in the presence of 2?wt% (of the acrylate/E7 mixture) of a photoinitiator. Electro-optical, thermal and optical characterization was used to understand the effect of the LC concentration on the electro-optical and thermo-physical properties of these materials. Polarizing optical microscopy (POM) and differential scanning calorimetry (DSC) studies were performed to observe the system morphology and to determine the transition temperatures of these materials, both as a function of their composition. The findings showed a slight variation of the nematic-isotropic transition temperature, T_NI, of the LC E7 and of the glass transition temperature, T_g, of the TPGDA polymeric matrix as a function of the mass percentage of the LC E7. A very good electro-optical response for the composition 30/70?wt % TPGDA/LC E7 was obtained.     

o-Trityl phenoxy-imino vanadium (III) complexes: synthesis,characterization, and catalysis on ethylene (co)polymerization

Several phenoxy-imine ligands bearing o-trityl group in phenoxy moiety RN=CHArOH (Ar = C₆H₂(CPh₃)^tBu, R = 2,6-Me₂C₆H₃ ( L ₁ H ); 2,6-ⁱPr₂C₆H₃ ( L ₂ H ); 3,5-(CF₃)₂C₆H₃ ( L ₃ H ); 3,5-(OMe)₂C₆H₃ ( L ₄ H ); CHPh₂ ( L ₅ H ); CPh₃ ( L ₆ H )) were synthesized and characterized by¹H NMR and ¹³C NMR spectroscopy. The vanadium complexes based on these ligands LVCl₂(THF)₂ ( 1–6 ) were synthesized via conventional transmetalation reaction in moderate to high yields. Complexes 1–6 were fully characterized by FT-IR, elemental analyses and the molecular structures of 1 , 2 ·H₂O, (2 ·H₂O ) ₂ (μ-Cl) ₂ , 4 , and 5 were confirmed by X-ray crystallographic analysis in which the six-coordinated vanadium centers are in a typical octahedral geometry. Upon activation with Et₂AlCl in toluene, complexes 1–6 showed high activities in ethylene polymerization affording polymers with moderate molecular weight (5.9–11.8 × 10⁴ Da). Moreover, in hexane or CH₂Cl₂, 1–6 /Et₂AlCl exhibited enhanced activities. When activated with MAO or MMAO in toluene, these complexes showed relatively low activities but afforded polymers with ultra-high molecular weight (up to 3.30 × 10⁶ Da). 1–6 /Et₂AlCl also showed high activities in ethylene/1-hexene copolymerization at room temperature giving moderate molecular-weight polymers (6.5–11.4 × 10⁴ Da) with co-monomer incorporation being of 6.0 ~ 7.8%.     

Amphiphilic thermoset elastomers from metal‐free,click crosslinking of PEG‐grafted silicone surfactants

The hydrophobicity of silicone elastomers can compromise their utility in some biomaterials applications. Few effective processes exist to introduce hydrophilic groups onto a polysiloxane backbone and subsequently crosslink the material into elastomers. This problem can be overcome through the utilization of metal‐free click reactions between azidoalkylsilicones and alkynyl‐modified silicones and/or PEGs to both functionalize and crosslink silicone elastomers. Alkynyl‐functional PEG was clicked onto a fraction of the available azido groups of a functional polysiloxane, yielding azido reactive PDMS‐g‐PEG rake surfactants. The reactive polymers were then used to crosslink alkynyl‐terminated PDMS of different molecular weights. Using simple starting materials, this generic yet versatile method permits the preparation and characterization of a library of amphiphilic thermoset elastomers that vary in their composition, crosslink density, elasticity, hydrogel formation, and wettability. An appropriate balance of PEG length and crosslink density leads to a permanently highly wettable silicone elastomer that demonstrated very low levels of protein adsorption. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1082–1093     

Crystallization of Poly(ethylene adipate) within γ-Phase Poly(vinylidene fluoride) Matrix

The effects of PEA on the γ-phase PVDF crystal structure and the crystallization of PEA within the pre-existing γ-phase PVDF spherulites have been investigated by optical microscopy(OM), infrared spectroscopy(IR) and scanning electron microscopy(SEM). The results demonstrate that the γ-phase PVDF spherulites consist of the lamellae exhibiting a highly curved scroll-like morphology and develop preferentially in PEA-rich blend. With increasing PEA concentration, the scroll diameter increases and the scrolls are better separated from each other. PEA crystallizes first in the interspherulitic region and transcrystalline layer develops. Subsequently, the transcrystalline layer of PEA continues to grow within the γ-phase PVDF spherulites, e.g., in the region between the scrolls, until impinging on other PEA transcrystalline layers or spherulites. The crystallization kinetics results indicate that the growth rate of PEA crystals in the intraspherulitic region of γ-phase PVDF shows a positive correlation with content of PEA, but a negative one with the crystallization temperature of γ-phase PVDF.     

Crosslinked poly(ethylene oxide) containing siloxanes fabricated through thiol‐ene photochemistry

Homogenous amphiphilic crosslinked polymer films comprising of poly(ethylene oxide) and polysiloxane were synthesized utilizing thiol‐ene “ click ” photochemistry. A systematic variation in polymer composition was Carried out to obtain high quality films with varied amount of siloxane and poly(ethylene oxide). These films showed improved gas separation performance with high gas permeabilities with good CO₂/N₂ selectivity. Furthermore, the resulting films were also tested for its biocompatibility, as a carrier media which allow human adult mesenchymal stem cells to retain their capacity for osteoblastic differentiation after transplantation. The obtained crosslinked films were characterized using differential scanning calorimetry, dynamic mechanical analysis, thermogravimetric analysis, FTIR, Raman‐IR , and small angle X‐ray scattering. The synthesis ease and commercial availability of the starting materials suggests that these new crosslinked polymer networks could find applications in wide range of applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1548–1557     

Influence of ionic liquid counterions on activity and selectivity of ethylene trimerization using chromium-based catalysts in biphasic media

In recent years ionic liquids (ILs) have attracted much interest because of their widespread use in various fields. Several trimerization and oligomerization catalysts have been evaluated in ILs with different organic–inorganic hybrid structures. High catalytic activity and selectivity, easy product separation, and recycling of the catalyst are the advantages of a biphasic catalyst system compared to the homogeneous catalysts. In this study, the influence of IL counter-anions on activity and selectivity of the ethylene trimerization catalysts based on Cr-SNS-R was investigated. All synthesized materials were characterized using Fourier-transform infrared spectroscopy, ¹H NMR, ¹³C NMR, UV–Vis. spectroscopy, thin-layer chromatography, and elemental analysis (CHNS). In ethylene trimerization reaction, the dodecyl substituent in the SNS ligand exhibited better activity and selectivity than the butyl substituent. The results revealed that the presence of BF₄⁻ as a counter-anion in the IL led to an increase in activity and selectivity compared to Br⁻ and I⁻ counter-anions. It was found that the BF₄⁻ counter-anion plays a conclusive role in the development of 1-hexene activity and selectivity to a maximum amount of 71,132 g_1-C6/(g_Cr × h) and more than 99%, respectively. Finally, the catalyst was reused thrice without losing its 1-hexene selectivity.     

Structure and gas transport characteristics of triethylene oxide-grafted polystyrene-b-poly(ethylene-co-butylene)-b-polystyrene

Polymeric membrane-based gas separation technology has significant advantages compared with traditional amine-based CO₂ separation method. In this work, SEBS block copolymer is used as a polymer matrix to incorporate triethylene oxide (TEO) functionality. The short ethylene oxide segment is chosen to avoid crystallization, which is confirmed by differential scanning calorimetry and wide-angle X-ray scattering characterizations. The gas permeability results reveal that CO₂/N₂ selectivity increased with increasing content of TEO functional group. The highest CO₂ permeability (281 Barrer) and CO₂/N₂ selectivity (31) were obtained for the membrane with the highest TEO incorporation (57 mol%). Increasing the TEO content in these copolymers results in an increase in CO₂ solubility and a decrease in C₂H₆ solubility. For example, as the grafted TEO content increased from 0 to 57 mol%, the CO₂ solubility and CO₂/C₂H₆ solubility selectivity increased from 0.72 to 1.3 cm³(STP)/cm³ atm and 0.47 to 1.3 at 35°C, respectively. The polar ether linkage in TEO-grafted SEBS copolymers exhibits favorable interaction with CO₂ and unfavorable interaction with nonpolar C₂H₆, thus enhancing CO₂/C₂H₆ solubility selectivity.     

导热增强聚乙二醇相变复合材料的制备及其性能

本文以聚乙二醇(PEG)为相变材料,通过添加不同的无机填料,采用熔融共混浇筑方式制备了导热增强型相变复合材料。 通过扫描电子显微镜(SEM)、热常数分析仪、差示扫描量热仪(DSC)、红外热成像和热重分析仪研究了所制备复合材料的微观结构、导热性能与相变过程。 研究结果表明,相比于碳酸钙和氧化铝,在相同添加含量下,氮化硼(BN)可有效提高PEG的导热系数,当BN质量分数为40%时,导热系数可达到3.40 W/(m·K);当填料添加量相同时,片状BN和不规则纳米碳酸钙(CaCO₃)比球形氧化铝(Al₂O₃)对PEG具有更加优良的定型效果,在相变过程中,能够更加有效阻隔PEG的流动,保持复合材料的形状稳定性。     

Obtaining of a PET-CaF2 hybrid multifilament: Non-isothermal crystallization studies

Poly(ethylene terephthalate) (PET) has been mixed with fluorite (CaF₂) particles to obtain micro- and nano-composites aiming to obtain a hybrid multifilament. In first term, the use of two montanic waxes and an amide wax as dispersing agents towards the compatibilization of the inorganic and organic components of the CaF₂/PET composite were considered. To do this, non-isothermal crystallization studies by differential scanning calorimetry have been carried out. Moreover, the influence of the CaF₂ particle size and concentration on the thermal properties of the system have been also studied by this technique. Finally, the extrapolation of the results has materialised as a novel PET/CaF₂ hybrid multifilament. Thermal and mechanical properties and molecular weight of the multifilament have been as well evaluated.